![]() ![]() In comparison to other wood finishes, the natural vegetable oils and waxes allow for an even colouring and a harmonic, smooth surface result.Įasy application – no need for primer or sanding between coats – saves time and money. Osmo Wood Wax Finish 1101 Clear Extra Thin is resistant to water and dirt, is extremely durable and smoothens wood surfaces. This is the perfect finish for dark woods and exotic woods either as a base coat or as a stand-alone coat. ![]() one coat thinly to cabinet interiors and drawers with a cloth.OSMO Wood Wax Finish 1101 Clear Extra Thin is a clear, satin wood finish which combines all the advantages of oils and waxes in one unique product. Oils enhance the natural colour tone of wood (permanent wet effect).Ĭaution: Apply max. NoteĪpplying the product too generously and insufficient ventilation lead to delays in drying time and the typical smell of oil.Ĭhoose colour tones that match the natural tone of wood or a darker colour tone (trial application). Other surfaces may lead to reduced coverage. All information refers to smooth and planed/cut surfaces. Product coverage depends significantly on the character of the wood. Allow for good ventilation while drying Coverageġ litre covers approx. Helps to retain the natural untreated look of lighter coloured woods. Lower temperatures and/or higher air humidity can increase the drying time. Perfect as a base coat or can be intermixed to create different shades. Osmos finish plus#24 hours (normal climatic conditions, 23 ☌/50 % rel. Not to be confused with traditional oil finishes, OSMO Polyx-Oil is an engineered low VOC finish made with natural plant oils and waxes, plus just enough. In general, intensively coloured applications (2 coloured coats) are not recommended for flooring due to the risk of applying too much product. 1 coat and then generally a thin top coat with clear Osmo Polyx®-Oil Original. Important: For mechanically loaded areas, e.g. Note: Larger areas can also be coated by using a scraper. ![]() Intensively coloured (2 coats): Apply very thinly to the clean and dry wood surface along the wood grain with a natural bristle brush or a microfibre roller. For a more subtle stained effect, apply thinly with a lint-free cloth and within 20 minutes, wipe away cleanly and evenly. Transparent coloured (1 coat): Apply very thinly to the clean and dry wood surface along the wood grain with a natural bristle brush or a microfibre roller and spread well. The oil penetrates into the wood surface, protecting the wood from deep within. Osmos finish trial#Therefore, a trial application is always required, especially for unfamiliar surfaces. Osmo finishes are based on natural oils and waxes. The finished surface is, among other things, influenced by the wood‘s natural characteristics. If possible, please apply the first coat to all sides before installation. Before applying oils, remove sanding dust from the surface by sweeping or vacuuming. ![]() Sand wood surface carefully, begin with coarse sandpaper – final sanding work for flooring P100-150, for furniture P180-240. Fill small cracks, larger joints or holes in wood. As a general rule, wear a dust mask during sanding works. Old paints and lacquers must be completely removed. Osmo Wood Wax Finish is ready to use, please do not thin. The wood surface must be clean, dry and frost-free (max. Osmo Wood Wax Finish is highly recommended for furniture and children’s toys. Ideal as a coloured primer for wooden flooring (apply Osmo Polyx-Oil as a second coat) and for recoating darkened wood surfaces. It is also suitable for edge-glued panels, chipboard and MDF. Osmo Wood Wax Finish is suitable for protecting and decorating interior wood: wall panelling, mouldings and beams as well as doors. When dry, finish is safe for humans, animals and plants (saliva-resistant and sweatproof according to DIN 53160 (German industrial norm), suitable for children‘s toys as per the EN 71.3 European norm. Osmo Wood Wax Finish is resistant to wine, beer, cola, tea, fruit juice, milk and water according to DIN 68861-1C (German industrial norm) – no water spots. Suitable for wood, does not crack, peel, flake or blister. Osmo Wood Wax Finish is easy to apply, without primer or intermediate sanding. In comparison to conventional finishes, the use of plant ingredients creates a more evenly coloured and more harmonious appearance. Osmo Wood Wax Finish is resistant to dirt, water and abrasion and smoothens the surface. Osmo Wood Wax Finish uniquely combines the advantages of natural oils and waxes in one product. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |